International Coatings 7038 BLAZE COTTON WHITE

FEATURES

The new and improved Blaze™ Cotton White 7038 is here! It's back and it’s better than ever. Blaze™ White has been reformulated to provide improved body, coverage, and a more matte finish. Best of all, Blaze™ is now part of our FlexCure™ line and can be cured from a low 290°F to 320°F (143°C - 160°C).

Blaze™ Cotton White is a non-phthalate, high pigment, fast flashing, low tack, high performance plastisol screen printing ink.

Blaze™ Cotton White is very creamy, short bodied and very opaque, resulting in excellent coverage on dark garments.

Formulated to be a high performance, opaque underlay.

SPOT FLASHING

Blaze™ Cotton White will spot dry, with a very low after flash tack. Dwell time is dependent on the spot dryer used. In some cases, you may have to lower the heat of the spot cure unit because too much heat may actually make the ink tacky. When you spot dry, you are only partially fusing or gelling the surface of the ink. The ink should be just dry to the touch, with no lift-off, but not totally fused. Totally fusing the underprint white may cause inter-coat adhesion problems with the inks printed on top of the white ink. Final fusing or curing should occur in the dryer.