International Coatings 96 Metallic Silver Plastisol Ink

Features

When printed, Metallic Silver 96 creates a "chrome" metallic appearance.

The best results are obtained when Metallic Silver 96 is directly printed onto a fabric or garment.

Metallic Silver 96 designs can be used on both light and dark textiles.

SPOT FLASHING

This product has a very low after-flash tack and will spot dry. The length of stay is based on the spot dryer that was employed. In certain situations, the spot cure unit's heat may need to be lowered. The ink could get viscous if heated to an excessive degree. You are just partially fusing or gelling the ink's surface when you spot dry. The ink ought to be nearly dry to the contact, not fully fused, yet without lift off.

SCREEN MESH - 74-160 t/in (30-63 t/cm) monofilament

CURE TEMPERATURES - 325°F (163°C) entire ink film