International Coatings 92 Metallic Gold Plastisol Ink

Features:

When printed, Metallic Gold 92 creates a "gilded" metallic appearance.

The best results are obtained when Metallic Gold 92 is directly printed onto a fabric or garment.

Metallic Gold 92 designs can be used on both light and dark textiles.

SPOT FLASHING

This product has a very low after-flash tack and will spot dry. The length of stay is based on the spot dryer that was employed. In certain situations, the spot cure unit's heat may need to be lowered. The ink could get viscous if heated to an excessive degree. You are just partially fusing or gelling the ink's surface when you spot dry. The ink ought to be nearly dry to the contact, not fully fused, yet without lift off.

SCREEN MESH - 74-160 t/in (30-63 t/cm) monofilament

CURE TEMPERATURES - 325°F (163°C) entire ink film